Видео

Can they completely freeze in ice and thaw in spring?

Great video...thanks.

Where did you get that driftwood

Nice work, and appreciate you sharing. One area of confusion for me is I understand you to say you be using all 50 gallon low boys. 50 gallon low boys are all 48” in length. You showed on the first section you have roughly 1/2” wiggle room on either side = 1inch total per section. When I calculate the length of 2x4 required for 2 sections an 8 footer is too short. My reasoning: (a) 1-1/2” at the beginning sitting in the dado cut (b) each tank is 48” - 2X48”= 96” (c) 1/2” wiggle room on each end of each aquarium = 2” (d) middle leg of 2 tank sections uses 1.5” (e) the 3rd leg uses 3/4” Total required is 101-3/4”. Meaning 8 ft (96”) is too short.

Do you might know why my small smooth newts arent eating

Think I could get away with this using 2x4 for 1 60g breeder?

Do you have a video showing how you built your set up?

I really like this update. Have you calculated yield in lbs per square foot per month or week?

Masin name

the vacuuming up part works, now just need to figure out the right material to contain the debris.

I have same kind of valve in my sprinklers box and it’s leaking on that round cap in the middle of the valve. Any way someone can tell me why and how to fix that. Before today I only had little bit of the water when I just turn the valve on. But today is full stream of water out of it. Thank you in advance.

dude wrong disc for the angle grinder.. you need the domed wood cutter. Ive made bowls out of logs that size using this alone.

Made mine and I'm weirdly obsessed with it. I come out everyday and just look at it. Does your worms go into the sponge? Mine go all through them.

Do u breed/ sell your newts!???

Thanks!

Thanks!

What a great tour. You do a fantastic presentation, nice order, not too fast or slow, and very well explained.

Now I watched 5 other videos that says to soak then boil then soak then boil. It will leach and tannin.. and mild and kill all my fish. Smh. I’m gonna stick mine in a bucket for a week and go from there I guess. Did it harm your fish at all? I see this is an old video…. Still safe though?

To mach bla bla bla

These are Awesome!! Thanks for the video!!

Nice Idea I will just ask in the market for coconut shell

Hello so i habe separate worm tanks but i put them in all tanks and id like to harvest but whats best way? I seen some say Electric but idk what they are useing

Polymer clay is actually perfectly safe for an aquarium as long as it's cured fully

"L" is for LINE, not LOAD.

Impressive. About a decade late to the party but wondering if you still have your fish room setup and how it's going. Is the Jehmco still kicking?

tanksalways levels flat and Styrofoam allows the tank to settle level !!!!!!!!!!!!!!!!!!!!!!, liker water in a glass... stand can be off but the always levels and the foam allows it to do so

I love the addition of the live plants to that as well. Thank you for the great video.

Good info

One question 🙋 Is about the female endlres , all the female are same ? Because I saw a lots different type of endlres red , blue yellow but always I saw the same females like assorted that is normal ?

I'm doing my 1st bbs attempt. I think I may have ruined it in the first 2 hours. I became distracted and the temp got up to 92 degrees. I'm at the 32 hour mark right now and I don't see any seperation of shells so I'm guessing it's not going to hatch. Anyone else ever over heat the eggs? I'm just going to let it run till the morning and see what happens. I used SF bay eggs and right now they are all the same color which is orange. I watched several videos and nobody has ever said how to tell if they are hatched visually. They just said 24 to 36 hours.

You’d have a much easier time mixing if you use a fork to stir instead of a spoon. If you’re quick, you can use a silicone spatula to scrape out the mixing container to eliminate all waste

Top video

A Further Update Please Greg............ Are the blackworms actually Tubifex ..... ??

I don't have a sump OR this much space

Thank you for this video! Just helped me remove it in less than 5 mins. I used the toothbrush and water method.

Hi Mr.Greg I have noticed you have not put any videos. Is everything ok with you and your family? God Bless You Mr.Greg

This setup is so cool! Can we get more videos on what you have going on in your fish room?

is there a preferred temperature for them? i live in a hot tropical climate

Great video! Advanced technique of narrow neck bottles and harvesting process!

GENIUS !!!!!!!

How quickly do they reproduce?

How large was your starter culture? Does their number double in one or two months, and what enables that? Do they cut themselves in the rocks as they travel to food? Sorry for the barrage of questions, but you, pretty much alone on the internet, seem to know what you're talking about on this subject. Subscriber.

Put some assassin snails in with the worms. That will keep the pest snails down. You can feed them small fish pellets from time to time.

This has sparked an idea in me. I would love to start aquaponics with crawfish because I love the way they taste and also I can grow vegtables

I live near Portland Oregon and have been able to keep rainbow shiners, white clouds, rice fish, goldfish and shrimp out year round. For how far north we are we are in plant hardiness zone 8b the same north on the east coast has a way lower harder zone number

Can someone send me a little culture to Hungary?

ABSOLUTELY do a SUMP VIDEO !!!!!!! I need to do one.

Great information! Thank you very much! unfortunately, I replaced all my pool valves due to broken handles. Thanks again

Love it

Dont forget to put a towel or something to catch the piece of glass so it doesn't fall and crack other side.